TH8082

Enhanced SoloLIN Transceiver

TH8082 – Datasheet

Page 25 of 26

3901008082

Feb 2007

Rev 007

10. Assembly Information

This Melexis device is classified and qualified regarding soldering technology, solderability and moisture

sensitivity level, as defined in this specification, according to following test methods:

IPC/JEDEC J-STD-020

Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount Devices

(classification reflow profiles according to table 5-2)

EIA/JEDEC JESD22-A113

Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing

(reflow profiles according to table 2)

CECC00802

Standard Method For The Specification of Surface Mounting Components (SMDs) of Assessed

Quality

EIA/JEDEC JESD22-B106

Resistance to soldering temperature for through-hole mounted devices

EN60749-15

Resistance to soldering temperature for through-hole mounted devices

MIL 883 Method 2003 / EIA/JEDEC JESD22-B102

Solderability

For all soldering technologies deviating from above mentioned standard conditions (regarding peak

temperature, temperature gradient, temperature profile etc) additional classification and qualification tests

have to be agreed upon with Melexis.

The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of

adhesive strength between device and board.

Based on Melexis commitment to environmental responsibility, European legislation (Directive on the

Restriction of the Use of Certain Hazardous substances, RoHS) and customer requests, Melexis has

installed a roadmap to qualify their package families for lead free processes also.

Various lead free generic qualifications are running, current results on request.

For more information on Melexis lead free statement see quality page at our website:

http://www.melexis.com/html/pdf/MLXleadfree-statement.pdf

11. Disclaimer

Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its

Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the

information set forth herein or regarding the freedom of the described devices from patent infringement.

Melexis reserves the right to change specifications and prices at any time and without notice. Therefore,

prior to designing this product into a system, it is necessary to check with Melexis for current information.

This product is intended for use in normal commercial applications. Applications requiring extended

temperature range, unusual environmental requirements, or high reliability applications, such as military,

medical life-support or life-sustaining equipment are specifically not recommended without additional

processing by Melexis for each application.

The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be

liable to recipient or any third party for any damages, including but not limited to personal injury, property

damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential

damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical

data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis’ rendering

of technical or other services.

© 2002 Melexis NV. All rights reserved.