10

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

9. Connect the black negative (-) clamp to the negative (-) battery terminal or to a

suitable earthing point on the vehicle chassis ensuring the connections are firm

and secure.

10. When the correct connection has been made, the screen will show either “12V

JUMP START READY'” or “24V JUMP START READY”and the battery level.

11. Crank the engine.

12.If the vehicle does not start after 5 to 8 seconds, stop, then wait a minute

before trying again.

13. Once the engine is running, disconnect the earthed clamp FIRST i.e. that

connected to the chassis or Negative terminal etc, and return it to its storage

position, then disconnect the Positive clamp from the battery terminal, and restore

to its storage position.

14. Recharge the jump starter after use.

• If the battery is allowed to remain in a discharged state, its life may be

shortened.

• Regularly check the charge level of the battery by pressing the Power

button on the front panel.

WARNING: IT IS POSSIBLE THAT SOME ELECTRONIC EQUIPMENT

COULD BE DAMAGED BY JUMP STARTING. ALWAYS CHECK WITH

THE CAR MANUFACTURER’S HANDBOOK TO DETERMINE WHAT

PRECAUTIONS IF ANY SHOULD BE TAKEN.