| Electronic Components Datasheet Search |
|
JS1224LI Datasheet(PDF) 3 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
JS1224LI Datasheet(HTML) 3 Page - Clarke International |
|
3 / 16 page ![]() 3 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com GENERAL SAFETY RULES 1. ALWAYS ensure when jump-starting that air can circulate freely around the jumpstart. 2. NEVER allow the negative and positive leads on this unit to touch each other or to touch the same metal object. 3. Although the jump-start is water resistant and may be used outdoors, DO NOT leave it exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture etc. 4. This jump-start is designed for use with 12V or 24V electrical systems. 5. DO NOT operate the jump-start if any of the cables are damaged. Consult your Clarke dealer for repair or replacement. 6. DO NOT operate the jump-start if the case is damaged. Consult your Clarke dealer or a qualified person for inspection and repair. 7. Ensure the vehicle battery posts and battery clamps are perfectly clean before use. 8. When connecting the jump-start leads to a battery, ensure the ON/OFF switch is OFF, and ALWAYS connect the RED, (positive’+’) output conductor to the UNEARTHED (+) battery terminal FIRST, then connect the BLACK, (negative) conductor to a suitable earthing point on the chassis, well away from any fuel lines. 9. ALWAYS wear suitable protective clothing and eye protection when working with lead-acid batteries. 10. The jump-start is NOT designed to be used as a replacement for the vehicle battery. 11. DO NOT attempt to BOOST CHARGE the jump-start's sealed battery. 12. NEVER allow the cables to become wrapped around the operator or any other person. 13. NEVER attempt any repairs yourself. If you have a problem with the jump-start contact your local Clarke dealer. 14. ALWAYS keep your body and clothing dry. Never work in damp area without adequate insulation against electric shock. 15. NEVER jump-start the engine whilst the jump-start is being charged. 16. ALWAYS store the jump-starter out of reach of children. 17. If splashed by battery acid, immediately flush the area of the splash with clean water. If a burning sensation is felt or any blistering occurs, seek medical help. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |