TAS5705PAPR datasheet(24/71 Pages) TI

24 / 71 page

2C-COMPATIBLE SERIAL CONTROL INTERFACE

TAS5705

SLOS549 – JUNE 2008 ...................................................................................................................................................................................................... www.ti.com

The TAS5705 DAP has an I2C serial control slave interface to receive commands from a system controller. The

serial control interface supports both normal-speed (100-kHz) and high-speed (400-kHz) operations without wait

states. As an added feature, this interface operates even if MCLK is absent.

The serial control interface supports both single-byte and multibyte read and write operations for status registers

and the general control registers associated with the PWM.

The I2C interface supports a special mode which permits I2C write operations to be broken up into multiple

data-write operations that are multiples of 4 data bytes. These are 6-, 10-, 14-, 18-, ... etc., -byte write operations

that are composed of a device address, read/write bit, subaddress, and any multiple of 4 bytes of data. This

permits the system to write large register values incrementally without blocking other I2C transactions.

Submit Documentation Feedback

Product Folder Link(s): TAS5705

TAS5705PAPR Datasheet(PDF) 24 Page - Texas Instruments

TAS5705PAPR Datasheet(HTML) 24 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

Datasheet Download

Link URL