HD6432142 datasheet(119/1177 Pages) RENESAS

119 / 1177 page

Section 2 CPU

Rev. 4.00 Sep 27, 2006 page 75 of 1130

REJ09B0327-0400

2.8.3

Exception-Handling State

The exception-handling state is a transient state that occurs when the CPU alters the normal

processing flow due to a reset, interrupt, or trap instruction. The CPU fetches a start address

(vector) from the exception vector table and branches to that address.

Types of Exception Handling and Their Priority

Exception handling is performed for resets, interrupts, and trap instructions. Table 2.7 indicates

the types of exception handling and their priority. Trap instruction exception handling is always

accepted in the program execution state.

Exception handling and the stack structure depend on the interrupt control mode set in SYSCR.

Table 2.7

Exception Handling Types and Priority

Priority

Type of Exception

Detection Timing

Start of Exception Handling

High

Reset

Synchronized with clock

Exception handling starts

immediately after a low-to-high

transition at the

RES pin, or

when the watchdog timer

overflows.

Interrupt

End of instruction

execution or end of

exception-handling

sequence*

When an interrupt is requested,

exception handling starts at the

end of the current instruction or

current exception-handling

sequence.

Low

Trap instruction

When TRAPA instruction

is executed

Exception handling starts when

a trap (TRAPA) instruction is

executed.*

Notes: 1. Interrupts are not detected at the end of the ANDC, ORC, XORC, and LDC instructions,

or immediately after reset exception handling.

2. Trap instruction exception handling is always accepted in the program execution state.

Reset Exception Handling

After the

RES pin has gone low and the reset state has been entered, when RES goes high again,

reset exception handling starts. When reset exception handling starts the CPU fetches a start

address (vector) from the exception vector table and starts program execution from that address.

All interrupts, including NMI, are disabled during reset exception handling and after it ends.

HD6432142 Datasheet(PDF) 119 Page - Renesas Technology Corp

HD6432142 Datasheet(HTML) 119 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL