| Electronic Components Datasheet Search |
|
HC210W Datasheet(PDF) 45 Page - Altera Corporation |
|
|
|||||||||||||||||||||||||||||
HC210W Datasheet(HTML) 45 Page - Altera Corporation |
|
45 / 228 page ![]() Altera Corporation 4–3 September 2008 DC Electrical Characteristics DC Electrical Characteristics Table 4–4 shows the HardCopy II device family’s DC electrical characteristics. TJ Operating junction temperature For commercial use 0 85 °C For industrial use -40 100 °C Notes to Table 4–3: (1) Supply voltage specifications apply to voltage readings taken at the device pins, not at the power supply. (2) Maximum VCC rise time is 100 ms, and VCC must rise monotonically. (3) VCCPD must ramp-up from 0 V to 3.3 V within 100 µs to 100 ms. If VCCPD is not ramped up within this specified time, the HardCopy II device will not power up successfully. (4) During transitions, the inputs may overshoot to the voltage shown in Table 4–2 based upon the input duty cycle. The DC case is equivalent to a 100% duty cycle. During transitions, the inputs may undershoot to –2.0 V for input currents less than 100 mA and periods shorter than 20 ns. (5) All pins, including dedicated inputs, clock, I/O, and JTAG pins, may be driven before VCCINT, VCCPD, and VCCIO are powered. (6) VCCIO maximum and minimum conditions for PCI and PCI-X are shown in parentheses. Table 4–3. HardCopy II Device Recommended Operating Conditions Note (1) (Part 2 of 2) Symbol Parameter Conditions Minimum Maximum Unit Table 4–4. HardCopy II Device DC Operating Conditions Note (1) (Part 1 of 2) Symbol Parameter Conditions Device Minimum Typical Maximum Unit II Input pin leakage current VI = VCCIO max to 0 V (2) all -10 — 10 µA IOZ Tri-stated I/O pin leakage current VO = VCCIO max to 0 V (2) all -10 — 10 µA ICCINT0 VCCINT supply current (standby) VI = ground, no load, no toggling inputs TJ = 25° C HC210W — 0.09 (3) (5) A HC210 — 0.09 (3) (5) A HC220 — 0.19 (3) (5) A HC230 — 0.34 (3) (5) A HC240 — 0.52 (3) (5) A ICCPD0 VCCPD supply current (standby) VI = ground, no load, no toggling inputs TJ = 25° C VCCPD = 3.3 V HC210W — 3 (3) (5) mA HC210 — 3 (3) (5) mA HC220 — 4 (3) (5) mA HC230 — 5 (3) (5) mA HC240 — 5 (3) (5) mA |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |