PC912XDP512F0CALR datasheet(64/1348 Pages) FREESCALE

64 / 1348 page

Chapter 1 Device Overview MC9S12XD-Family

MC9S12XDP512 Data Sheet, Rev. 2.21

Freescale Semiconductor

be conﬁgured as master output (during master mode) or slave input pin (during slave mode) MOSI of the

serial peripheral interface 2 (SPI2).

1.2.3.55

PP4 / KWP4 / PWM4 / MISO2 — Port P I/O Pin 4

PP4 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as pulse width modulator (PWM) channel 4 output. It can

be conﬁgured as master input (during master mode) or slave output (during slave mode) pin MISO of the

serial peripheral interface 2 (SPI2).

1.2.3.56

PP3 / KWP3 / PWM3 / SS1 — Port P I/O Pin 3

PP3 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as pulse width modulator (PWM) channel 3 output. It can

be conﬁgured as slave select pin SS of the serial peripheral interface 1 (SPI1).

1.2.3.57

PP2 / KWP2 / PWM2 / SCK1 — Port P I/O Pin 2

PP2 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as pulse width modulator (PWM) channel 2 output. It can

be conﬁgured as serial clock pin SCK of the serial peripheral interface 1 (SPI1).

1.2.3.58

PP1 / KWP1 / PWM1 / MOSI1 — Port P I/O Pin 1

PP1 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as pulse width modulator (PWM) channel 1 output. It can

be conﬁgured as master output (during master mode) or slave input pin (during slave mode) MOSI of the

serial peripheral interface 1 (SPI1).

1.2.3.59

PP0 / KWP0 / PWM0 / MISO1 — Port P I/O Pin 0

PP0 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as pulse width modulator (PWM) channel 0 output. It can

be conﬁgured as master input (during master mode) or slave output (during slave mode) pin MISO of the

serial peripheral interface 1 (SPI1).

1.2.3.60

PS7 / SS0 — Port S I/O Pin 7

PS7 is a general-purpose input or output pin. It can be conﬁgured as the slave select pin SS of the serial

peripheral interface 0 (SPI0).

1.2.3.61

PS6 / SCK0 — Port S I/O Pin 6

PS6 is a general-purpose input or output pin. It can be conﬁgured as the serial clock pin SCK of the serial

peripheral interface 0 (SPI0).

PC912XDP512F0CALR Datasheet(PDF) 64 Page - Freescale Semiconductor, Inc