ST7LNB1Y0 datasheet(26/36 Pages) STMICROELECTRONICS

26 / 36 page

Electrical characteristics

ST7LNB1Y0

26/36

5.5.2

Electromagnetic Interference (EMI)

Based on a simple application running on the product (toggling 2 LEDs through the I/O

ports), the product is monitored in terms of emission. This emission test is in line with the

norm SAE J 1752/3 which specifies the board and the loading of each pin.

5.5.3

Absolute maximum ratings (electrical sensitivity)

Based on three different tests (ESD, LU and DLU) using specific measurement methods, the

product is stressed in order to determine its performance in terms of electrical sensitivity.

For more details, refer to the application note AN1181.

Electrostatic Discharge (ESD)

Electrostatic Discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts*(n+1) supply pin). This test

conforms to the JESD22-A114A/A115A standard.

Table 26.

EMI characteristics(1)

Data based on characterization results, not tested in production.

Symbol

Parameter

Conditions

Monitored

Frequency

Band

Max vs.

[fOSC/fCPU]

Unit

1/4

MHz

1/8

MHz

SEMI

Peak level

VDD=5V, TA=+25°C,

SO16 package,

conforming to SAE J 1752/3

0.1 MHz to

30 MHz

814

µV

30 MHz to

130 MHz

130 MHz to

1GHz

SAE EMI Level

3.5

Table 27.

Absolute maximum ratings(1)

Data based on characterization results, not tested in production.

Symbol

Ratings

Conditions

Maximum

value 1)

Unit

VESD(HBM)

Electrostatic discharge voltage

(Human Body Model)

TA=+25 °C

4000

ST7LNB1Y0 Datasheet(PDF) 26 Page - STMicroelectronics

ST7LNB1Y0 Datasheet(HTML) 26 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Datasheet Download

Link URL