MPC8315ECVRAGDA datasheet(50/112 Pages) FREESCALE

50 / 112 page

MPC8315E PowerQUICC™ II Pro Processor Hardware Specifications, Rev. 0

Freescale Semiconductor

PCI

Figure 33 provides the AC test load for the I2C.

Figure 33. I2C AC Test Load

Figure 34 shows the AC timing diagram for the I2C bus.

Figure 34. I2C Bus AC Timing Diagram

14 PCI

This section describes the DC and AC electrical specifications for the PCI bus of the MPC8315E.

Noise margin at the HIGH level for each connected device (including hysteresis)

VNH

0.2

× NVDD

—

Notes:

1. The symbols used for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state)(reference)(state) for

inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tI2DVKH symbolizes I

2C timing

(I2) with respect to the time data input signals (D) reach the valid state (V) relative to the tI2C clock reference (K) going to

the high (H) state or setup time. Also, tI2SXKL symbolizes I

2C timing (I2) for the time that the data with respect to the start

condition (S) went invalid (X) relative to the tI2C clock reference (K) going to the low (L) state or hold time. Also, tI2PVKH

symbolizes I2C timing (I2) for the time that the data with respect to the stop condition (P) reaching the valid state (V) relative

to the tI2C clock reference (K) going to the high (H) state or setup time. For rise and fall times, the latter convention is used

with the appropriate letter: R (rise) or F (fall).

2. MPC8315E provides a hold time of at least 300 ns for the SDA signal (referred to the VIHmin of the SCL signal) to bridge the

undefined region of the falling edge of SCL.

3. The maximum tI2DVKH has to be met only if the device does not stretch the LOW period (tI2CL) of the SCL signal.

4. MPC8315E does not follow the

I2C-BUS Specifications version 2.1 regarding the tI2CF AC parameter.

Table 48. I2C AC Electrical Specifications (continued)

All values refer to VIH (min) and VIL (max) levels (see Table 47)

Parameter

Symbol 1

Min

Max

Unit

Output

Z0 = 50 Ω

NVDD/2

RL = 50 Ω

SDA

SCL

tI2CF

tI2SXKL

tI2CL

tI2CH

tI2DXKL

tI2DVKH

tI2SXKL

tI2SVKH

tI2KHKL

tI2PVKH

tI2CR

tI2CF

MPC8315ECVRAGDA Datasheet(PDF) 50 Page - Freescale Semiconductor, Inc

MPC8315ECVRAGDA Datasheet(HTML) 50 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL