MPC8377E datasheet(52/126 Pages) FREESCALE

52 / 126 page

MPC8377E PowerQUICC II Pro Processor Hardware Specifications, Rev. 4

Freescale Semiconductor

JTAG

11.3.2.1

High-Speed Read Meeting Setup (Maximum Delay)

The following equations show how to calculate the allowed combined propagation delay range of the

SD_CLK and SD_DAT/CMD signals on the PCB.

tCLK_DELAY + tDATA_DELAY + tODLY + tSHSIVKH < 1.5 × tSHSCK

Eqn. 15

tCLK_DELAY + tDATA_DELAY < 1.5 × tSHSCK – tODLY – tSHSIVKH

Eqn. 16

This means that Data + Clock delay can be up to 11 ns for a 20 ns clock cycle:

tCLK_DELAY + tDATA_DELAY < 30 – 14 – 5

tCLK_DELAY + tDATA_DELAY < 11

11.3.2.2

High-Speed Read Meeting Hold (Minimum Delay)

The following equations show how to calculate the allowed combined propagation delay range of the

SD_CLK and SD_DAT/CMD signals on the PCB.

0.5

× t

SHSCK < tCLK_DELAY + tDATA_DELAY + tOH – tSHSIXKH + tINT_CLK_DLY

Eqn. 17

0.5

× t

SHSCK – tOH + tSHSIXKH – tINT_CLK_DLY < tCLK_DELAY + tDATA_DELAY

Eqn. 18

This means that Data + Clock delay must be greater than ~6 ns for a 20 ns clock cycle:

10 – 2.5 + (–1.5) < tCLK_DELAY + tDATA_DELAY

6 < tCLK_DELAY + tDATA_DELAY

11.3.2.3

High-Speed Read Combined Formula

The following equation is the combined formula to calculate the propagation delay range of the SD_CLK

and SD_DAT/CMD signals on the PCB.

0.5

× t

SHSCK – tOH + tSHSIXKH < tCLK_DELAY + tDATA_DELAY < 1.5 × tSHSCK – tODLY – tSHSIVKH

Eqn. 19

12 JTAG

This section describes the DC and AC electrical specifications for the IEEE 1149.1 (JTAG) interface of

the MPC8377E.

MPC8377E Datasheet(PDF) 52 Page - Freescale Semiconductor, Inc