WM8523GEFLSLASHV datasheet(24/51 Pages) WOLFSON

24 / 51 page

WM8523

Production Data

PD, Rev 4.1, August 2011

Figure 22 DSP Mode Audio Interface (mode B, AIF_LRCLK_INV=1, Slave)

DIGITAL AUDIO INTERFACE CONTROL

The control of the audio interface in software mode is achieved by register write. Dynamically changing

the audio data format may cause erroneous operation and is not recommended.

Digital audio data is transferred to the WM8523 via the digital audio interface. The DAC operates in

master or slave mode.

The DAC audio interface requires left/right frame clock (LRCLK) and bit clock (BCLK). These can be

supplied externally (slave mode) or they can be generated internally (master mode). Selection of master

and slave mode is achieved by setting AIF_MSTR bit in Register 3.

The frequency of LRCLK in master mode is dependent upon the DAC master clock frequency and the

AIF_SR[2:0] bits. The frequency of BCLK in master mode can be selected by AIF_BCLKDIV[2:0]. In

slave mode, the MCLK to LRCLK ratio can be auto-detected or set manually using the AIF_SR[2:0] bits.

ADDRESS

BIT

LABEL

DEFAULT

DESCRIPTION

AIF_CTRL1

03h

AIF_MSTR

Master/Slave Select

0 = Slave

1 = Master

AIF_CTRL2

04h

2:0

AIF_SR[2:0

000

MCLK:LRCLK Ratio

000 = Auto detect

001 = 128fs

010 = 192fs

011 = 256fs

100 = 384fs

101 = 512fs

110 = 768fs

111 = 1152fs

5:3

AIF_BCLK

DIV[2:0]

000

BCLK Divider Control (Master Mode)

000 = MCLK/4

001 = MCLK/8

010 = 32fs

011 = 64fs

100 = 128fs

101 - 111 reserved

Table 9 DAC Clocking Mode Control

WM8523GEFL/V Datasheet(PDF) 24 Page - Wolfson Microelectronics plc

WM8523GEFL/V Datasheet(HTML) 24 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Datasheet Download

Link URL