| Electronic Components Datasheet Search |
|
KTPF0100UG Datasheet(PDF) 58 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
KTPF0100UG Datasheet(HTML) 58 Page - Freescale Semiconductor, Inc |
|
58 / 74 page ![]() KTPF0100UG, Rev. 2.0 58 Freescale Semiconductor Graphical User Interface Description Figure 49. Scripting Log Session Example Note: If it is desired to carry out One-Time Programming of the PF0100 device soldered on the KITPF0100EPEVBE evaluation board, ensure that the board hardware is correctly configured according to the chosen OTP settings. Furthermore, the KITPF0100EPEVBE allows the configuration of the SW2 regulator or an external 3.3V LDO output as the VDDIO/I2C pull-up supply. By default, the SW2 regulator is the source for the VDDIO supply (J30 = 3-2). If the SW2 regulator is to be set below 3.0V then make sure the 3.3V LDO output is connected to VDDIO and the I2C pull-up resistors by removing R34 and R33 and shorting pins 1, 2 and 3 of J30. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |