MPC5534MVM80 datasheet(16/60 Pages) FREESCALE

16 / 60 page

MPC5534 Microcontroller Data Sheet, Rev. 6

Electrical Characteristics

Freescale Semiconductor

Fast I/O weak pullup current 21

1.62–1.98 V

2.25–2.75 V

3.00–3.60 V

IACT_F

110

130

170

A

Fast I/O weak pulldown current 21

1.62–1.98 V

2.25–2.75 V

3.00–3.60 V

100

130

170

A

Slow and medium I/O weak pullup/down current 21

3.0–3.6 V

4.5–5.5 V

IACT_S

150

170

A

I/O input leakage current 22

IINACT_D

–2.5

2.5

A

DC injection current (per pin)

IIC

–2.0

2.0

Analog input current, channel off 23

IINACT_A

–150

150

35a Analog input current, shared analog / digital pins

(AN[12], AN[13], AN[14], AN[15])

IINACT_AD

–2.5

2.5

A

VSS to VSSA differential voltage

VSS – VSSA

–100

100

Analog reference low voltage

VRL

VSSA – 0.1

VSSA + 0.1

VRL differential voltage

VRL – VSSA

–100

100

Analog reference high voltage

VRH

VDDA – 0.1

VDDA + 0.1

VREF differential voltage

VRH – VRL

4.5

5.25

VSSSYN to VSS differential voltage

VSSSYN – VSS

–50

VRCVSS to VSS differential voltage

VRCVSS – VSS

–50

VDDF to VDD differential voltage

VDDF – VDD

–100

100

43a VRC33 to VDDSYN differential voltage

VRC33 – VDDSYN

–0.1

0.1 25

Analog input differential signal range (with common mode 2.5 V)

VIDIFF

–2.5

2.5

Operating temperature range, ambient (packaged)

TA = (TL to TH)TL

C

Slew rate on power-supply pins

—

V/ms

1 V

DDE2 and VDDE3 are limited to 2.25–3.6 V only if SIU_ECCR[EBTS] = 0; VDDE2 and VDDE3 have a range of 1.6–3.6 V if

SIU_ECCR[EBTS] = 1.

2 | V

DDA0 – VDDA1 | must be < 0.1 V.

3 V

PP can drop to 3.0 V during read operations.

4 If standby operation is not required, connect V

STBY to ground.

5 Applies to CLKOUT, external bus pins, and Nexus pins.

6 Maximum average RMS DC current.

7 Figure 2 shows an illustration of the I

DD_STBY values interpolated for these temperature values.

8 Average current measured on Automotive benchmark.

9 Peak currents can be higher on specialized code.

10 High use current measured while running optimized SPE assembly code with all channels of the eMIOS and eTPU running

autonomously, plus the eDMA transferring data continuously from SRAM to SRAM.

Table 9. DC Electrical Specifications (TA = TL to TH) (continued)

Spec

Characteristic

Symbol

Min

Max.

Unit

MPC5534MVM80 Datasheet(PDF) 16 Page - Freescale Semiconductor, Inc

MPC5534MVM80 Datasheet(HTML) 16 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Datasheet Download

Link URL