MPC8358ECVRADDDA datasheet(72/102 Pages) FREESCALE

72 / 102 page

MPC8360E/MPC8358E PowerQUICC II Pro Processor Revision 2.x TBGA Silicon Hardware Specifications, Rev. 5

Freescale Semiconductor

Pinout Listings

This table shows the pin list of the MPC8358E TBGA package.

No Connect

AM20, AU19

—

Notes:

1. This pin is an open drain signal. A weak pull-up resistor (1 k

Ω) should be placed on this pin to OVDD

2. This pin is an open drain signal. A weak pull-up resistor (2–10 k

Ω) should be placed on this pin to OVDD.

3. This output is actively driven during reset rather than being three-stated during reset.

4. These JTAG pins have weak internal pull-up P-FETs that are always enabled.

5. This pin should have a weak pull up if the chip is in PCI host mode. Follow PCI specifications recommendation.

6. These are On Die Termination pins, used to control DDR2 memories internal termination resistance.

7. This pin must always be tied to GND.

8. This pin must always be left not connected.

9. Refer to MPC8360E PowerQUICC II Pro Integrated Communications Processor Reference Manual section on “RGMII Pins,”

for information about the two UCC2 Ethernet interface options.

10.It is recommended that MDIC0 be tied to GND using an 18.2

Ω resistor and MDIC1 be tied to DDR power using an 18.2 Ω

resistor for DDR2.

Table 67. MPC8358E TBGA Pinout Listing

Signal

Package Pin Number

Pin Type

Power

Supply

Notes

DDR SDRAM Memory Controller Interface

MEMC1_MDQ[0:63]

AJ34, AK33, AL33, AL35, AJ33, AK34, AK32,

AM36, AN37, AN35, AR34, AT34, AP37, AP36,

AR36, AT35, AP34, AR32, AP32, AM31, AN33,

AM34, AM33, AM30, AP31, AM27, AR30, AT32,

AN29, AP29, AN27, AR29, AN8, AN7, AM8, AM6,

AP9, AN9, AT7, AP7, AU6, AP6, AR4, AR3, AT6,

AT5, AR5, AT3, AP4, AM5, AP3, AN3, AN5, AL5,

AN4, AM2, AL2, AH5, AK3, AJ2, AJ3, AH4, AK4,

AH3

I/O

GVDD

—

MEMC_MECC[0:4]/MSRCID[0:4]

AP24, AN22, AM19, AN19, AM24

I/O

GVDD

—

MEMC_MECC[5]/MDVAL

AM23

I/O

GVDD

—

MEMC_MECC[6:7]

AM22, AN18

I/O

GVDD

—

MEMC_MDM[0:8]

AL36, AN34, AP33, AN28,AT9, AU4, AM3,

AJ6,AP27

OGVDD

—

MEMC_MDQS[0:8]

AK35, AP35, AN31, AM26,AT8, AU3, AL4, AJ5,

AP26

I/O

GVDD

—

MEMC_MBA[0:1]

AU29, AU30

GVDD

MEMC_MBA[2]

AT30

GVDD

—

MEMC_MA[0:14]

AU21, AP22, AP21, AT21, AU25, AU26, AT23,

AR26, AU24, AR23, AR28, AU23, AR22, AU20,

AR18

OGVDD

—

MEMC_MODT[0:3]

AG33, AJ36, AT1, AK2

GVDD

Table 66. MPC8360E TBGA Pinout Listing (continued)

Signal

Package Pin Number

Pin Type

Power

Supply

Notes

MPC8358ECVRADDDA Datasheet(PDF) 72 Page - Freescale Semiconductor, Inc

MPC8358ECVRADDDA Datasheet(HTML) 72 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL