| Electronic Components Datasheet Search |
|
STM32F207IC Datasheet(PDF) 99 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F207IC Datasheet(HTML) 99 Page - STMicroelectronics |
|
99 / 163 page ![]() STM32F205xx, STM32F207xx Electrical characteristics Doc ID 15818 Rev 7 99/163 I2S - SPI interface characteristics Unless otherwise specified, the parameters given in Table 49 for SPI or in Table 50 for I2S are derived from tests performed under the ambient temperature, fPCLKx frequency and VDD supply voltage conditions summarized in Table 10. Refer to Section 5.3.16: I/O port characteristics for more details on the input/output alternate function characteristics (NSS, SCK, MOSI, MISO for SPI and WS, CK, SD for I2S). Table 49. SPI characteristics(1)(2) 1. Remapped SPI1 characteristics to be determined. 2. TBD stands for “to be defined”. Symbol Parameter Conditions Min Max Unit fSCK 1/tc(SCK) SPI clock frequency Master mode - 30 MHz Slave mode - 30 tr(SCL) tf(SCL) SPI clock rise and fall time Capacitive load: C = 30 pF - 8 ns DuCy(SCK) SPI slave input clock duty cycle Slave mode 30 70 % tsu(NSS) (3) 3. Based on characterization, not tested in production. NSS setup time Slave mode 4 tPCLK - ns th(NSS) (3) NSS hold time Slave mode 2 tPCLK - tw(SCLH) (3) tw(SCLL) (3) SCK high and low time Master mode, fPCLK = 30 MHz, presc = 4 TBD TBD tsu(MI) (3) tsu(SI) (3) Data input setup time Master mode 5 - Slave mode 5 - th(MI) (3) th(SI) (3) Data input hold time Master mode 5 - Slave mode 4 - ta(SO) (3)(4) 4. Min time is for the minimum time to drive the output and the max time is for the maximum time to validate the data. Data output access time Slave mode, fPCLK = 20 MHz 0 3 tPCLK tdis(SO) (3)(5) 5. Min time is for the minimum time to invalidate the output and the max time is for the maximum time to put the data in Hi-Z Data output disable time Slave mode 2 10 tv(SO) (3)(1) Data output valid time Slave mode (after enable edge) - 25 tv(MO) (3)(1) Data output valid time Master mode (after enable edge) - 5 th(SO) (3) Data output hold time Slave mode (after enable edge) 15 - th(MO) (3) Master mode (after enable edge) 2 - |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |