VRMS=14V datasheet(44/46 Pages) EPCOS

Part #	VRMS=14V

Description	SIOV metal oxide varistors Leaded varistors, StandarD series

PDF	46 Pages

Scroll/Zoom	100%

Manufacturer	EPCOS [EPCOS]

Direct Link	http://www.epcos.com

Logo

44 / 46 page

Mounting

Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic

that will degrade the component’s electrical characteristics.

Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this

reason SIOVs should be physically shielded from adjacent components.

Operation

Use SIOVs only within the specified temperature operating range.

Use SIOVs only within the specified voltage and current ranges.

Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric con-

ditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas,

sulfuric acid gas etc), corrosive agents, humid or salty conditions.Contact with any liquids and

solvents should be prevented.

Leaded varistors

B722*

StandarD series

Page 44 of 46

Please read Cautions and warnings and

Important notes at the end of this document.

VRMS=14V Datasheet(PDF) 44 Page - EPCOS