| Electronic Components Datasheet Search |
|
DS2154 Datasheet(PDF) 35 Page - Dallas Semiconductor |
|
|
|||||||||||||||||||||||||||||
DS2154 Datasheet(HTML) 35 Page - Dallas Semiconductor |
|
35 / 87 page ![]() DS2154 35 of 87 CRC4 SYNC COUNTER The CRC4 Sync Counter increments each time the 8 ms CRC4 multiframe search times out. The counter is cleared when the DS2154 has successfully obtained synchronization at the CRC4 level. The counter can also be cleared by disabling the CRC4 mode (CCR1.0=0). This counter is useful for determining the amount of time the DS2154 has been searching for synchronization at the CRC4 level. ITU G.706 suggests that if synchronization at the CRC4 level cannot be obtained within 400 ms, then the search should be abandoned and proper action taken. The CRC4 Sync Counter will rollover. SR1: STATUS REGISTER 1 (Address=06 Hex) (MSB) (LSB) RSA1 RDMA RSA0 RSLIP RUA1 RRA RCL RLOS SYMBOL POSITION NAME AND DESCRIPTION RSA1 SR1.7 Receive Signaling All 1s / Signaling Change. Set when the contents of timeslot 16 contains less than three 0s over 16 consecutive frames. This alarm is not disabled in the CCS signaling mode. Both RSA1 and RSA0 will be set if a change in signaling is detected. RDMA SR1.6 Receive Distant MF Alarm. Set when bit 6 of timeslot 16 in frame 0 has been set for two consecutive multiframes. This alarm is not disabled in the CCS signaling mode. RSA0 SR1.5 Receive Signaling All 0s / Signaling Change. Set when over a full MF, timeslot 16 contains all 0s. Both RSA1 and RSA0 will be set if a change in signaling is detected. RSLIP SR1.4 Receive Side Elastic Store Slip. Set when the elastic store has either repeated or deleted a frame of data. RUA1 SR1.3 Receive Unframed All 1s. Set when an unframed all 1s code is received at RPOSI and RNEGI. RRA SR1.2 Receive Remote Alarm. Set when a remote alarm is received at RPOSI and RNEGI. RCL SR1.1 Receive Carrier Loss. Set when 255 (or 2048 if CCR3.0=1) consecutive 0s have been detected at RTIP and RRING. [Note: a test mode exists to allow the DS2154 to detect carrier loss at RPOSI and RNEGI in place of detection at RTIP and RRING]. RLOS SR1.0 Receive Loss of Sync. Set when the device is not synchronized to the receive E1 stream. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |