B57374V2104F060 datasheet(16/21 Pages) EPCOS

Part #	B57374V2104F060

Description	NTC thermistors for temperature measurement

PDF	21 Pages

Scroll/Zoom	100%

Manufacturer	EPCOS [EPCOS]

Direct Link	http://www.epcos.com

Logo

16 / 21 page

Placement and orientation of SMD NTC thermistors on PCB

a) Component placement

It is recommended that the PC board

should be held by means of some

adequate supporting pins such as

shown left to prevent the SMDs from

being damaged or cracked.

b) Cracks

When placing a component near an

area which is apt to bend or a grid

groove on the PC board, it is advisable

to have both electrodes subjected to

uniform stress, or to position the

component's electrodes at right angles

to the grid groove or bending line (see

c) Component orientation).

c) Component orientation

Choose a mounting position that

minimizes the stress imposed on the

chip during flexing or bending of the

board.

Temperature measurement and compensation

B573**V2

SMD NTC thermistors, case size 0603 (1608)

Standard series

Page 16 of 21

Please read Cautions and warnings and

Important notes at the end of this document.

B57374V2104F060 Datasheet(PDF) 16 Page - EPCOS