MB90583CAPFV datasheet(11/124 Pages) FUJITSU

11 / 124 page

MB90580C Series

*1: FPT-100P-M06

*2: FPT-100P-M05

(Continued)

Pin no.

Pin name

Circuit

type

Function

QFP*1

LQFP*2

P43

(CMOS/H)

General-purpose I/O port.

This pin serves as an open-drain output port with OD43 in the open-

drain control setting register (ODR4) set to “1”. [The pin is disabled

with the input setting (DDR4 register: D43=“0”).]

SIN1

UART1 serial data input (SIN1) pin.

When UART1 is operating for input, this input is used as required and

thus the output from any other function to the pin must be off unless

used intentionally.

P44

(CMOS/H)

General-purpose I/O port.

This pin serves as an open-drain output port with OD44 in the open-

drain control setting register (ODR4) set to “1”. [The pin is disabled

with the input setting (DDR4 register: D44=“0”).]

SOT1

UART1 serial data output pin (SOT1).

This pin is enabled with the UART1 serial data output enabled.

P45

(CMOS/H)

General-purpose I/O port.

This pin serves as an open-drain output port with OD45 in the open-

drain control setting register (ODR4) set to “1”. [The pin is disabled

with the input setting (DDR4 register: D45=“0”).]

SCK1

UART1 serial clock I/O pin (SCK1).

This pin is enabled with the UART1 clock output enabled.

P46

(CMOS/H)

General-purpose I/O port.

This pin serves as an open-drain output port with OD46 in the open-

drain control setting register (ODR4) set to “1”. [The pin is disabled

with the input setting (DDR4 register: D46=“0”).]

ADTG

External trigger input pin (ADTG) for the A/D converter.

P47

(CMOS/H)

General-purpose I/O port.

This pin serves as an open-drain output port with OD47 in the open-

drain control setting register (ODR4) set to “1”. [The pin is disabled

with the input setting (DDR4 register: D47=“0”).]

P50

(CMOS/H)

General-purpose I/O port.

AN0

Analog input pin (AN0) for use during A/D converter operation.

SIN3

UART3 serial data input pin (SIN3).

When UART3 is operating for input, this input is used as required and

thus the output from any other function to the pin must be off unless

used intentionally.

P51

(CMOS/H)

General-purpose I/O port.

AN1

Analog input pin (AN1) for use during A/D converter operation.

SOT3

UART3 serial data output pin (SOT3).

This pin is enabled with the UART3 serial data output enabled.

MB90583CAPFV Datasheet(PDF) 11 Page - fujitsu semiconductor

MB90583CAPFV Datasheet(HTML) 11 Page - fujitsu semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL