| Electronic Components Datasheet Search |
|
PIC17C752-08/CL Datasheet(PDF) 179 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC17C752-08/CL Datasheet(HTML) 179 Page - Microchip Technology |
|
179 / 328 page ![]() © 1998 Microchip Technology Inc. DS30289A-page 179 PIC17C7XX The ADRESH:ADRESL registers contains the 10-bit result of the A/D conversion. When the A/D conversion is complete, the result is loaded into this A/D result reg- ister pair, the GO/DONE bit (ADCON0<2>) is cleared, and A/D interrupt flag bit ADIF is set. The block dia- grams of the A/D module are shown in Figure 16-3. After the A/D module has been configured as desired, the selected channel must be acquired before the con- version is started. The analog input channels must have their corresponding DDR bits selected as inputs. To determine sample time, see Section 16.1. After this acquisition time has elapsed the A/D conversion can be started. The following steps should be followed for doing an A/D conversion: 1. Configure the A/D module: • Configure analog pins / voltage reference / and digital I/O (ADCON1) • Select A/D input channel (ADCON0) • Select A/D conversion clock (ADCON0) • Turn on A/D module (ADCON0) 2. Configure A/D interrupt (if desired): • Clear ADIF bit • Set ADIE bit • Clear GLINTD bit 3. Wait the required acquisition time. 4. Start conversion: • Set GO/DONE bit (ADCON0) 5. Wait for A/D conversion to complete, by either: • Polling for the GO/DONE bit to be cleared OR • Waiting for the A/D interrupt 6. Read A/D Result register pair (ADRESH:ADRESL), clear bit ADIF if required. 7. For next conversion, go to step 1 or step 2 as required. The A/D conversion time per bit is defined as TAD. A minimum wait of 2TAD is required before next acquisition starts. FIGURE 16-3: A/D BLOCK DIAGRAM (Input voltage) VIN VREF- (Reference voltage) AVDD PCFG0 CHS3:CHS0 AN7 AN6 AN5 AN4 AN3 AN2 AN1 AN0 0111 0110 0101 0100 0011 0010 0001 0000 A/D Converter AN11 AN10 AN9 AN8 1011 1010 1001 1000 VREF+ AVSS AN12(1) 1011 AN13(1) 1011 AN14(1) 1011 AN15(1) 1011 (1) These channels only available on PIC16C76X devices |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |