ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the

rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/

Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including

without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications

and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey

any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,

or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur.

Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and

distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such

unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

This literature is subject to all applicable copyright laws and is not for resale in any manner.

AR0230CS: 1/2.7-Inch 2.1 Mp/Full HD Digital Image Sensor

Revision History

AR0230CS/D Rev. 8, Pub. 11/15 EN

36

©Semiconductor Components Industries, LLC, 2015 .

DR-Pix is a trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.

• Replaced Table 7, “Operating Current Consumption in Parallel Output and Linear

Mode,” on page 21 with Table 9, “1080p30 HDR (ALTM) 74MHz Parallel 2.8V,” on

page 26

• Replaced Table 8, “Operating Current Consumption in Parallel Output and HDR

Mode,” on page 21 with Table 10, “1080p30 Linear 74MHz Parallel 2.8V,” on page 26

• Replaced Table 9, “Operating Current in HiSPi (HiVCM) Output and Linear Mode,” on

page 22 with Table 11, “1080p30 HDR (ALTM) 74MHz Parallel 1.8V,” on page 26

• Replaced Table 10, “Operating Current in HiSPi (HiVCM) Output and HDR Mode,” on

page 22with Table 12, “1080p30 Linear 74 MHz Parallel 1.8V,” on page 27

• Replaced Table 11, “Operating Current in HiSPi (SLVS) Output and Linear Mode,” on

page 23 with Table 13, “1080p30 HDR (ALTM) 74 MHz HiSPi SLVS (Low Power Mode),”

on page 27

• Replaced Table 12, “Operating Current in HiSPi (SLVS) Output and HDR Mode,” on

page 23 with Table 14, “1080p30 Linear 74 MHz HiSPi SLVS,” on page 28

• Added Table 15, “1080p30 HDR (ALTM) 74 MHz HiSPi HiVcm (Low Power Mode),” on

page 28, Table 16, “1080p30 Linear 74 MHz HiSPi HiVcm,” on page 29, Table 17, “Line

Interleaved HiSPi SLVS,” on page 29, and Table 18, “Line Interleaved HiSPi HiVcm,” on

page 30