TLE8718SA datasheet(12/82 Pages) INFINEON

12 / 82 page

Data Sheet

Rev. 1.1, 2012-07-31

TLE 8718 SA

General Product Characteristics

Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the

data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are

not designed for continuous or repetitive operation.

Figure 4

Short Circuit test set-up

4.2.10 Input Pins

DELAYIN, SVBATT

DELAYIN_MR,

SVBATT_MR

-0.3

–

4.2.11 Current into Pin

SIP, SIN, SI,

FCLP, FCLN, FCL,

SSY, DIS5_10, RST,

DELAYIN, SVBATT, SDO

SIP_MR, ISIN_MR, ISI_MR,

FCLP_MR, IFCLN_MR,

FCL_MR, ISSY_MR,

DIS5_10_MR, IRST_MR,

DELAYIN_MR,

SVBATT_MR, ISDO_MR

-10

mA C

4.2.12 Current into Pin DELAYOUT, ABE

DELAYOUT_MR, IABE_MR

-10

mA C

Temperatures

4.2.13 Junction Temperature

-40

150

°CC

–

4.2.14 Storage Temperature

STG

-55

150

°CC

–

1) Other maximum ratings (like Item 4.2.7 to Item 4.2.10 or Item 4.2.13) are not allowed to be exceeded.

Table 3

Maximum Ratings

j = -40°C to +150°C, all voltages with respect to PGND, positive current flowing into pin, unless otherwise

specified

Pos. Parameter

Symbol

Values

Unit TC Conditions

min.

max.

PGND

OUTn

RECU

LHarness

RHarness

VBAT

Short_Circuit_test_setup.vsd

RBAT

LBAT

5µH

20m

80m

10m

0...5µH

TLE8718SA Datasheet(PDF) 12 Page - Infineon Technologies AG

TLE8718SA Datasheet(HTML) 12 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Datasheet Download

Link URL