THS8083APZP datasheet(39/64 Pages) TI

39 / 64 page

3–15

PWDN_REF

Powers down internal top and bottom references for all channels (VREFT / VREFB). If powered down,

enables user to supply external VREFT / VREFB references on corresponding pins.

0 = active (default)

1 = powered down

PWDN_BGAP

Powers down bandgap reference. If powered down, enables user to supply external VMID (input common

mode voltage) on corresponding pin.

0 = active (default)

1 = powered down

DTO_DIS

Disables the DTO. Can be disabled when an external clock (EXT_ADCCLK) is used and the user does not

intend to use the PLL output on DTOCLK3. When the PLL is active, it can be used as the clock source for the

ADC channels or the ADC’s can still run from EXT_ADCCLK depending on the SEL_ADCCLK register

setting. Note that when the DTO is enabled and the device is configured to use an external clock, the DTO

clock is still available on the DTOCLK3 pin so it can be used as a general-purpose clock synthesizer for other

parts in the system, possibly the display clock if this is different from the input pixel clock.

Since the DTO is also used for internal clock generation, power should always be supplied to the PLL supply

pins, even when the ADC sampling clock is fed from EXT_ADCCLK and DTO_DIS is active.

0 = active (default)

1 = powered down

3.2.44 Register Name: AUX_CTRL

Subaddress: 31 (R/W)

MSB

LSB

CS_SEL

CS_DIS

TEST2

TEST1

TEST0

TACT

CS_SEL

Composite sync select. Selects the source of the composite sync for slicing.

0 = from Ch1 input

1 = from CS_IN input

CS_DIS

Enables/disables the composite sync output on terminal CS/TEST1. The state of the CS output is also

dependent on the clamp range (see Composite Sync Slicer section).

0 = enabled (default)

1 = disabled

TEST[2..0]

TACT

Used for TI factory testing only; should not be changed from its all-0 default value.

3.2.45 Register Name: CH1_RDBK

Subaddress: 32 (R)

CH1_RDBK7

MSB

LSB

CH1_RDBK6

CH1_RDBK5

CH1_RDBK4

CH1_RDBK3

CH1_RDBK2

CH1_RDBK1

CH1_RDBK0

CH1_RDBK[7..0]:

Readback register of ADC channel 1

Default: (changed during operation)

THS8083APZP Datasheet(PDF) 39 Page - Texas Instruments

THS8083APZP Datasheet(HTML) 39 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL