STM32F398VE datasheet(14/151 Pages) STMICROELECTRONICS

14 / 151 page

Functional overview

STM32F398VE

14/151

DocID027227 Rev 2

CPU to achieve 90 Dhrystone MIPS at 72 MHz (when running code from the CCM (Core

Coupled Memory) RAM).



16 Kbytes of CCM SRAM mapped on both instruction and data bus, used to execute

critical routines or to access data (parity check on all of CCM SRAM).



64 Kbytes of SRAM mapped on the data bus (parity check on first 32 Kbytes of SRAM).

3.5

Boot modes

At startup, Boot0 pin and Boot1 option bit are used to select one of three boot options:



Boot from user Flash



Boot from system memory



Boot from embedded SRAM

The boot loader is located in the system memory. It is used to reprogram the Flash memory

by using USART1 (PA9/PA10) or USART2 (PA2/PA3) or I2C1 (PB6/PB7) or I2C3

(PA8/PB5).

3.6

Cyclic redundancy check (CRC)

The CRC (cyclic redundancy check) calculation unit is used to get a CRC code using a

configurable generator polynomial value and size.

Among other applications, CRC-based techniques are used to verify data transmission or

storage integrity. In the scope of the EN/IEC 60335-1 standard, they offer a means of

verifying the Flash memory integrity. The CRC calculation unit helps compute a signature of

the software during runtime, to be compared with a reference signature generated at

linktime and stored at a given memory location.

STM32F398VE Datasheet(PDF) 14 Page - STMicroelectronics