AD9608 datasheet(4/41 Pages) AD

4 / 41 page

Data Sheet

AD9608

Rev. C | Page 3 of 40

GENERAL DESCRIPTION

The AD9608 is a monolithic, dual-channel, 1.8 V supply, 10-bit,

105 MSPS/125 MSPS analog-to-digital converter (ADC) that

features a high performance sample-and-hold circuit and an

on-chip voltage reference.

The product uses multistage differential pipeline architecture

with output error correction logic to provide 10-bit accuracy at

125 MSPS data rates and to guarantee no missing codes over the

full operating temperature range.

The ADC contains several features designed to maximize

flexibility and minimize system cost, such as programmable

clock and data alignment and programmable digital test pattern

generation. The available digital test patterns include built-in

deterministic and pseudorandom patterns, along with custom

user-defined test patterns entered via the serial port interface (SPI).

A differential clock input controls all internal conversion cycles.

An optional duty cycle stabilizer (DCS) compensates for wide

variations in the clock duty cycle while maintaining excellent

overall ADC performance.

The digital output data is presented in offset binary, Gray code, or

twos complement format. A data output clock (DCO) is provided

for each ADC channel to ensure proper latch timing with receiving

logic. Logic levels of 1.8 V CMOS and 1.8 V LVDS are supported.

Output data can also be multiplexed onto a single output bus.

The AD9608 is available in a 64-lead RoHS-compliant LFCSP

and is specified over the industrial temperature range (−40°C to

+85°C).

AD9608 Datasheet(PDF) 4 Page - Analog Devices