TS4984 datasheet(19/29 Pages) STMICROELECTRONICS

19 / 29 page

Application Information

TS4984

19/29

4.2 Gain in typical application schematic

The typical application schematic (Figure 64) is shown on page 18.

In the flat region (no Cin effect), the output voltage of the first stage is:

For the second stage: Vout2 =-Vout1 (V)

The differential output voltage is:

The differential gain, referred to as Gv for greater convenience, is:

Vout2 is in phase with Vin and Vout1 is phased 180° with Vin. This means that the positive terminal of the

loudspeaker should be connected to Vout2 and the negative to Vout1.

4.3 Low and high frequency response

In the low frequency region, Cin starts to have an effect. Cin forms with Rin a high-pass filter with a -3dB

cut-off frequency:

In the high frequency region, you can limit the bandwidth by adding a capacitor (Cfeed) in parallel with

Rfeed. It forms a low-pass filter with a -3dB cut-off frequency. FCH is in Hz.

ou t1

–

()

feed

---------------

(V)

out2

ou t1

–

feed

---------------

(V)

out2

out1

–

------------------------------------

feed

---------------

πR

inCin

--------------------------

(Hz)

πR

feed Cfeed

----------------------------------------

(Hz)

TS4984 Datasheet(PDF) 19 Page - STMicroelectronics

TS4984 Datasheet(HTML) 19 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Datasheet Download

Link URL