TLE9250LE datasheet(10/28 Pages) INFINEON

Part #	TLE9250LE

Description	High Speed CAN Transceiver

PDF	28 Pages

Scroll/Zoom	100%

Manufacturer	INFINEON [Infineon Technologies AG]

Direct Link	http://www.infineon.com

Logo

10 / 28 page

Data Sheet

Rev. 1.0

2017-08-09

HS CAN Transceiver

High Speed CAN Transceiver

Modes of operation

• The undervoltage detection on VCC is enabled and powers down the device in case of detection.

5.4

Power-down state

Independent NRM and NEN input pins the TLE9250 is powered down if the supply voltage VCC < (see Figure 4).

In the power-down state the differential input resistors of the receiver are switched off. The CANH and CANL

bus interface of the TLE9250 is floating and acts as a high-impedance input with a very small leakage current.

The high-ohmic input does not influence the “recessive” level of the CAN network and allows an optimized

EME performance of the entire HS CAN network. In power-down state the transceiver is an invisible node to

the bus.

TLE9250LE Datasheet(PDF) 10 Page - Infineon Technologies AG