S71PL129JC0 datasheet(62/149 Pages) SPANSION

62 / 149 page

S29PL129J for MCP

S29PL129J_MCP_00_A0 June 4, 2004

Advance

Info rmation

Absolute Maximum Ratings

Storage Temperature Plastic Packages . . . . . . . . . . . . . . . . –65°C to +150°C

Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65°C to +125°C

Voltage with Respect to Ground

VCC (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V

A9, OE#, and RESET# (Note 2) . . . . . . . . . . . . . . . . . . . . . –0.5 V to +13.0 V

WP#/ACC (Note 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +10.5 V

All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to VCC +0.5 V

Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions,

input or I/O pins may overshoot VSS to –2.0 V for periods of up to 20 ns. Maximum

DC voltage on input or I/O pins is VCC +0.5 V. During voltage transitions, input or

I/O pins may overshoot to VCC +2.0 V for periods up to 20 ns. See Figure 8.

2. Minimum DC input voltage on pins A9, OE#, RESET#, and WP#/ACC is –0.5 V.

During voltage transitions, A9, OE#, WP#/ACC, and RESET# may overshoot VSS

to –2.0 V for periods of up to 20 ns. See Figure 8. Maximum DC input voltage on

pin A9, OE#, and RESET# is +12.5 V which may overshoot to +14.0 V for periods

up to 20 ns. Maximum DC input voltage on WP#/ACC is +9.5 V which may

overshoot to +12.0 V for periods up to 20 ns.

3. No more than one output may be shorted to ground at a time. Duration of the

short circuit should not be greater than one second.

4. Stresses above those listed under “Absolute Maximum Ratings” may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

sections of this data sheet is not implied. Exposure of the device to absolute max-

imum rating conditions for extended periods may affect device reliability.

Figure 8. Maximum Overshoot Waveforms

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

Maximum Negative Overshoot Waveform

Maximum Positive Overshoot Waveform

S71PL129JC0 Datasheet(PDF) 62 Page - SPANSION

S71PL129JC0 Datasheet(HTML) 62 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL