ML9092-01TB datasheet(47/66 Pages) OKI

47 / 66 page

FEDL9092-01

OKI Semiconductor

ML9092-01/02/03/04

47/66

(2) D6 (WLS) (Word Length Select)

1: 6-bit word length select

0: 8-bit word length select

This bit selects the word length of data to be written to and read from the display RAM. If “1” is written to this bit,

data will be read from and written to the display RAM in 6-bit units. If “0” is written to this bit, data will be read

from and written to the display RAM in 8-bit units. This bit is reset to “0” if the

RESET pin is pulled to a “L” level.

(3) D5 (KT) (Key scan time) Key scan time select bit

1: 10 ms

0: 5 ms

This bit selects the key scan cycle time. In the case of a 306 kHz oscillating frequency, writing a “1” to this bit sets

the key scan cycle time at 10 ms (1/3072 divided frequency of the oscillating frequency), writing a “0” sets the key

scan cycle time at 5 ms (1/1536 divided frequency of the oscillating frequency). This bit is set to “1” if the

RESET

pin is pulled to a “L” level.

(4) D4 (SHL) (Common driver shift direction select bit)

This bit selects the shift direction of common drivers.

The relationship between this bit and shift directions are shown below.

This bit is reset to “0” if the

RESET pin is pulled to a “L” level.

SHL

Duty

Shift direction

1/8

COM8

→

COM1

1/9

COM9

→

COM1

1/10

COM10

→

COM1

1/8

COM1

→

COM8

1/9

COM1

→

COM9

1/10

COM1

→

COM10

(5) D3 (BE) (Voltage doubler operation control bit )

This bit controls the operation of the voltage doubler. (Applies to ML9092-01/02.)

1: Voltage doubler enable

0: Voltage doubler disable

This bit is reset to “0” if the

RESET pin is pulled to a “L” level.

(6) D2 (PE) (General-purpose port output enable/disable select bit)

This bit selects high impedance output or output enable for the general-purpose port outputs A, B, C and D (C and

D apply to ML9092-01 only; B applies to ML9092-01/04).

1: Output enable

0: High-impedance output (output disable)

This bit is reset to “0” if the

RESET pin is pulled to a “L” level.

ML9092-01TB Datasheet(PDF) 47 Page - OKI electronic componets

ML9092-01TB Datasheet(HTML) 47 Page - OKI electronic componets

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Datasheet Download

Link URL