GPL191C datasheet(9/18 Pages) GENERALPLUS

9 / 18 page

GPL191C

Proprietary & Confidential

Mar. 08, 2010

Version: 1.1

6.10. Watchdog Timer (WDT)

An on-chip watchdog timer is available in the GPL191C. The

WDT is designed for recovering the system from abnormal

operation.

If the system is stalled, the WDT will generate a

system reset to restart system after one second.

If WDT is

enabled, the WDT should be cleared every 0.5 seconds to avoid

accidental reset. The WDT can be cleared by writing to WDT

clear register. Note that the WDT only works when 32768 Hz

clock is available.

6.11. Mask Options

6.11.1. 32768Hz oscillator

1). X’TAL

2). R-oscillator

6.11.2. Watchdog timer

1). Enable

2). Disable

6.11.3. TxD/RxD select

1). TxD as UART transmit output, RxD as UART receive input

2). TxD as I/O port EF4, RxD as I/O port EF5

6.11.4. Port EF bit7 – 0 with 600K, Pull-Low

Each bit can be optioned to Enable/Disable individually.

6.11.5. I/O and LCD driver

Some examples are shown below:

Dots

Segment

Common

Input/Output

1024

4 IOEF3 – 0

960

4 IOEF3 – 0

4 IOCD3 – 0

832

4 IOEF3 – 0

4 IOCD3 – 0

8 IOAB7 – 0

768

8 IOEF3 – 0

Each input/output port, IOAB7 – 0 and IOCD3 – 0, can be

optioned to LCD segments independently, and LCD commons

(COM15 – 12) can be optioned to IOEF7 – 6 when LCD mode is

1/8 duty or 1/12 duty. If UART is not used, 2 more I/O ports

(TxD/IOEF4, RxD/IOEF5) can be used.

GPL191C Datasheet(PDF) 9 Page - Generalplus Technology Inc.

GPL191C Datasheet(HTML) 9 Page - Generalplus Technology Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Datasheet Download

Link URL