6

OPA375, OPA2375

SBOS886B – NOVEMBER 2017 – REVISED JANUARY 2020

www.ti.com

Product Folder Links: OPA375 OPA2375

Submit Documentation Feedback

Copyright © 2017–2020, Texas Instruments Incorporated

(1)

Operating the device beyond the ratings listed under Absolute Maximum Ratings will cause permanent damage to the device. These are

stress ratings only, based on process and design limitations, and this device has not been designed to function outsdie the conditions

indicated under Recommended Operating Conditions. Exposure to any condition outside Recommended Operating Conditions for

extended periods, including absolute-maximum-rated conditions, may affect device reliability and performance.

(2)

Input pins are diode-clamped to the power-supply rails. Input signals that may swing more than 0.5 V beyond the supply rails must be

current limited to 10 mA or less.

(3)

Short-circuit to ground, one amplifier per package.

7 Specifications

7.1 Absolute Maximum Ratings

over operating ambient temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

0

6

V

Signal input pins

(V–) – 0.5

(V+) + 0.5

V

V

–10

10

mA

Continuous

–55

150

°C

150

°C

–65

150

°C

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.2 ESD Ratings

VALUE

UNIT

Electrostatic discharge

±3000

V

±2000

All Devices: Charged-device model (CDM), per JEDEC specification JESD22-C101

(2)

±1500

(1)

7.3 Recommended Operating Conditions

over operating ambient temperature range (unless otherwise noted)

MIN

MAX

UNIT

Supply voltage, (V+) – (V–) , for OPA2375 and OPA4375

5.5

V

Supply voltage, (V+) – (V–), for OPA375 only

2.25

5.5

V

Input voltage range

(V–)

(V+) – 1.2

V

Specified temperature

–40

125

°C

(1)

For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application

report SPRA953C.

7.4 Thermal Information for Single Channel

OPA375

UNIT

DCK

(SC70)

5 PINS

Junction-to-ambient thermal resistance

240.9

℃/W

Junction-to-case (top) thermal resistance

151.7

℃/W

Junction-to-board thermal resistance

64

℃/W

Junction-to-top characterization parameter

34.8

℃/W

Junction-to-board characterization parameter

63.3

℃/W

Junction-to-case (bottom) thermal resistance

n/a

℃/W