MIC5203 datasheet(3/20 Pages) MICROCHIP

3 / 20 page



2021 Microchip Technology Inc. and its subsidiaries

DS20006609A-page 3

MIC5203

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Supply Input Voltage (VIN) .......................................................................................................................... –20V to +20V

Enable Input Voltage (VEN) ......................................................................................................................... –20V to +20V

Power Dissipation (PD) (Note 1) ............................................................................................................Internally Limited

Operating Ratings ‡

Supply Input Voltage (VIN) ......................................................................................................................... +2.5V to +16V

Enable Input Voltage (VEN) .................................................................................................................................0V to VIN

† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the device at those or any other conditions above those indicated

in the operational sections of this specification is not intended. Exposure to maximum rating conditions for extended

periods may affect device reliability.

‡ Notice: The device is not guaranteed to function outside its operating ratings.

Note 1: The maximum allowable power dissipation at any TA (ambient temperature) is PD(MAX) = (TJ(MAX) – TA)/JA.

Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the reg-

ulator will go into thermal shutdown. The JA of the MIC5205-xxYM5 (all versions) is 220°C/W mounted on

a PC board.

ELECTRICAL CHARACTERISTICS

Electrical Characteristics: VIN = VOUT +1V; IL = 1 mA; CL = 0.47 µF; VEN ≥ 2.0V; TJ = +25°C, bold values indicate

–40°C < TJ ≤ +125°C, unless noted.

Parameter

Symbol

Min.

Typ.

Max.

Units

Conditions

Output Voltage Accuracy

–3

—

–4

—

Output Voltage Temperature

Coefficient

ΔVO/ΔT

—

200

ppm/°C Note 1

Line Regulation

ΔVO/VO

—

0.008

0.3

VIN = VOUT + 1V to 16V

—

0.5

Load Regulation

ΔVO/VO

—

0.08

0.3

IL = 0.1 mA to 80 mA, Note 2

—

0.5

Dropout Voltage, Note 3

ΔVO/VO

—

IL = 100 µA

—

200

350

IL = 20 mA

—

250

—

IL = 50 mA

—

300

600

IL = 80 mA

Quiescent Current

—

0.01

µA

VEN ≤ 0.4V (shutdown)

Ground Pin Current, Note 4

IGND

—

180

—

µA

IL = 100 µA, VEN ≥ 2.0V (active)

—

225

750

IL = 20 mA, VEN ≥ 2.0V (active)

—

850

—

IL = 50 mA, VEN ≥ 2.0V (active)

—

1800

3000

IL = 80 mA, VEN ≥ 2.0V (active)

Ground Pin Current at

Dropout

IGNDDO

—

200

300

µA

VIN = VOUT(nom) – 0.5V, Note 4

Current Limit

ILIMIT

—

180

250

VOUT = 0V

Thermal Regulation

ΔVO/ΔPD

—

0.05

—

%/W

Note 5

MIC5203 Datasheet(PDF) 3 Page - Microchip Technology

MIC5203 Datasheet(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Datasheet Download

Link URL