Test methods referenced above are EN 374 and ASTM F-739.

EN 374 reports the breakthrough detection time at a permeation

table above. ASTM F-739 reports the normalized breakthrough

reported in EN ISO 6529.

Important Notice

This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective

clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be

observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE will depend on the particular situation

and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE.

Final determination as to the suitability of these products for a particular situation is the employer’s responsibility. This

Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service.

LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether

direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of 3M PSD products, or the user’s

inability to use such products. THESE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE.

WARRANTY: 3M will replace or refund the purchase price of any Personal Safety Division product found to be defective in

material, manufacture, or not in conformance with any expressed warranty. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU

OF ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

3

Personal Safety Division

3M Center

Building 235-2W-70

St. Paul, MN 55144-1000

For more information:

In U.S.

Technical Assistance

1-800-243-4630

Customer Care Center 1-800-328-1667

3M.com/PPESafety

In Canada

Technical Assistance

1-800-267-4414

Customer Care

1-800-364-3577

3M.ca/PPESafety

3M and all other trademarks used

herein are trademarks of 3M Company,

used under license in Canada.

Please recycle. Printed in U.S.A.

© 3M 2015. All rights reserved.

70-0716-7164-1

EN14325 Classification

Class 6

>480 mins

Class 5

>240 mins

Class 4

>120 mins

Class 3

>60 mins

Class 2

>30 mins

Class 1

>10 mins