A product Line of

Diodes Incorporated

36 of 51

www.diodes.com

February 2020

© Diodes Incorporated

PI3DPX1202A

Document number: DS40115 Rev 3-3

PI3DPX1202A

6.2

PCB Layout Guideline

As transmission data rate increases rapidly, any flaws and/or mis-matches on PCB layout are amplified in terms of signal integrity. Lay-

out guideline for high-speed transmission is highlighted in this application note.

AC coupling Capacitor

Below is an example of placing AC coupling capacitors on high-speed channels.

Location

To wisely use the equalization selections offered by PI3DPX1202A, it is recommended to place PI3DPX1202A at the end of the entire

path. In short, PI3DPX1202A should be located close to the output DP connector in a source application. Below is the PI3DPX1202A

placement on its evaluation board.

Thermal Pad GND Via Recommendation

To wisely use the equalization selections offered by PI3DPX1202A, it is recommended to place PI3DPX1202A at the end of the entire

path. In short, PI3DPX1202A should be located close to the output DP connector in a source application. Below is the PI3DPX1202A

placement on its evaluation board .

Several GND vias are the “must” requirement in thermal pad. The recommended Via size is 12/24 mil.