8

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation

Manual.doc

Illustration of Terminal reels mounted on the AP-K2N Crimping Machine

MK-L

MKS-L

3.4 Mounting the safety guard

For reasons of safety and to comply with legislation,

safety guards must always be mounted to the crimping

machine. The above photographs illustrate the AP-K2N

crimping machine with the safety guards fitted.

The following photographs illustrate the different types of

guards available for the range of JST applicators.

WARNING

AN AUTHORISED COMPETENT PERSON

MUST ONLY CARRY OUT THE

FOLLOWING OPERATIONS.

When using the MK-L Applicator.

Step 1

Secure the fabricated steel guard (JST UK-7), onto the

Applicator using the cap head socket screws supplied.

Step 2

Secure the die guard (JST UK-1), onto the applicator

using the cap head socket screws supplied.

Step 3

Select the appropriate side guard (JST UK-4), and mount

onto the side guard support bracket (JST UK-9), using

the countersunk screws supplied.

Step 4

Remove the two upper motor fixing screws and clamp

the side guard support bracket onto the press utilising

these screws.

Step 5

Adjust the side guard support to achieve the best

relationship between guard and applicator.