| Electronic Components Datasheet Search |
|
PAC1941T-1E/4MX. Datasheet(PDF) 77 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PAC1941T-1E/4MX. Datasheet(HTML) 77 Page - Microchip Technology |
|
77 / 96 page ![]() 2021 Microchip Technology Inc. DS20006543A-page 77 PAC194X REGISTER 7-34: ALERT ENABLE (49H) REGISTER RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 CH1OC CH2OC CH3OC CH4OC CH1UC CH2UC CH3UC CH4UC bit 23 bit 16 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 CH1OV CH2OV CH3OV CH4OV CH1UV CH2UV CH3UV CH4UV bit 15 bit 8 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 U-0 CH1OP CH2OP CH3OP CH4OP ACC_OVF ACC_COUNT ALERT_CC — bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown Write to these bits to enable ALERT functions. See Section 5.16.4, "ALERT Functionality – Voltage, Current and Power". To enable OC, UC, OP, OV, UV ALERTs, write ‘1’ to the appropriate bit. ALERTs must be enabled in this reg- ister before they can be routed to an ALERT pin. Disable ALERTs in this register before modifying any of the various limits in Register 7-24, Register 7-25, Register 7-26, Register 7-27, Register 7-28 to avoid false triggers. A REFRESH (or REFRESH_V/G) is required to activate the enabled ALERTs. bit 23 CH1OC: 0 = ALERT for overcurrent on Channel 1 is disabled 1 = ALERT for overcurrent on Channel 1 is enabled bit 22 CH2OC: 0 = ALERT for overcurrent on Channel 2 is disabled 1 = ALERT for overcurrent on Channel 2 is enabled bit 21 CH3OC: 0 = ALERT for overcurrent on Channel 3 is disabled 1 = ALERT for overcurrent on Channel 3 is enabled bit 20 CH4OC: 0 = ALERT for overcurrent on Channel 4 is disabled 1 = ALERT for overcurrent on Channel 4 is enabled bit 19 CH1UC: 0 = ALERT for undercurrent on Channel 1 is disabled 1 = ALERT for undercurrent on Channel 1 is enabled bit 18 CH2UC: 0 = ALERT for undercurrent on Channel 2 is disabled 1 = ALERT for undercurrent on Channel 2 is enabled bit 17 CH3UC: 0 = ALERT for undercurrent on Channel 3 is disabled 1 = ALERT for undercurrent on Channel 3 is enabled bit 16 CH4UC: 0 = ALERT for undercurrent on Channel 4 is disabled 1 = ALERT for undercurrent on Channel 4 is enabled |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |