7614-6002 datasheet(16/36 Pages) RENESAS

16 / 36 page

E2 Lite

Outline

R20UT3240EJ0300 Rev.3.00

Page 16 of 36

May.15.20

1.7

Names of the Emulator Parts

The names of the parts of the E2 Lite are given in Figure 1.3 to Figure 1.5.

E2 Lite

(a) Logotype

The casing bears the “RENESAS E2 Lite” logotype.

(b) ACTIVE

LED

Marked ‘ACT’. This LED indicates the operating state of the E2 Lite control software.

Illuminated: The E2 Lite is connected to the emulator debugger.

Blinking: The host machine has recognized the emulator.

Not illuminated: The E2 Lite is not usable for some reason.

(d) VCC LED

Marked ‘VCC’. This LED indicates the current state of power supply to the user

system.

Illuminated (orange): The emulator is supplying power to the user system or external

power for the user system is on.

Not illuminated: The user system is not being supplied with power.

(e) RESET LED

Marked ‘RESET’. This LED indicates whether or not the signal on the MCU RESET pin

of the user system is being enabled.

Illuminated: The reset signal is enabled.

Not illuminated: The reset signal is disabled.

Figure 1.3 E2 Lite Top View

VCC

RESET

ACT

E2 Lite

USER I/F

(a)

(b)

(c)

(d)

GND

7614-6002 Datasheet(PDF) 16 Page - Renesas Technology Corp