Document Feedback

AS6221T

Pin Assignment

Datasheet

• PUBLIC

DS001032

• v1-00 • 2022-Apr-08

37

│ 7

Pin Number

Pin Name

Pin Type(1)

Description

C2

ALERT/ADD1

DIO_SOD

Alert Output and Address Select 1

(1)

Explanation of abbreviations:

S

Supply

DI_S

Digital Schmitt Trigger Input

DIO_SOD

Digital Schmitt Trigger Input / Open Drain Output

In Figure 4 the pins of AS6221T are described. External pull up resistors (to VDD) are necessary for

the pins

“SDA” and “SCL”.

The pin “ADD0” must not be left unconnected (refer to section 6.3.3 for further details).

The pin “ALERT/ADD1” is used to set the I²C address and has the additional functionality of triggering

an interrupt. In case this ALERT functionality is used, a pull up resistor (to VDD) is necessary. If this

functionality is not used it must be connected to VSS or SCL, depending on the selected I²C address

(refer to section 6.3.3 for further details). It must not be left unconnected.