STM32G431C6 datasheet(29/198 Pages) STMICROELECTRONICS

29 / 198 page

DS12589 Rev 6

29/198

STM32G431x6 STM32G431x8 STM32G431xB

Functional overview

3.18

Analog-to-digital converter (ADC)

The device embeds two successive approximation analog-to-digital converters with the

following features:

•

12-bit native resolution, with built-in calibration

•

4 Msps maximum conversion rate with full resolution

–

Down to 41.67 ns sampling time

–

Increased conversion rate for lower resolution (up to 6.66 Msps for 6-bit

resolution)

•

One external reference pin is available on all packages, allowing the input voltage

range to be independent from the power supply

•

Single-ended and differential mode inputs

•

Low-power design

–

Capable of low-current operation at low conversion rate (consumption decreases

linearly with speed)

–

Dual clock domain architecture: ADC speed independent from CPU frequency

•

Highly versatile digital interface

–

Single-shot or continuous/discontinuous sequencer-based scan mode: 2 groups

of analog signals conversions can be programmed to differentiate background and

high-priority real-time conversions

–

Each ADC support multiple trigger inputs for synchronization with on-chip timers

and external signals

–

Results stored into a data register or in RAM with DMA controller support

–

Data pre-processing: left/right alignment and per channel offset compensation

–

Built-in oversampling unit for enhanced SNR

–

Channel-wise programmable sampling time

–

Analog watchdog for automatic voltage monitoring, generating interrupts and

trigger for selected timers

–

Hardware assistant to prepare the context of the injected channels to allow fast

context switching

–

Flexible sample time control

–

Hardware gain and offset compensation

3.18.1

Temperature sensor

The temperature sensor (TS) generates a voltage VTS that varies linearly with temperature.

The temperature sensor is internally connected to the ADC1_IN16 input channel which is

used to convert the sensor output voltage into a digital value.

The sensor provides good linearity but it has to be calibrated to obtain good overall

accuracy of the temperature measurement. As the offset of the temperature sensor varies

from chip to chip due to process variation, the uncalibrated internal temperature sensor is

suitable for applications that detect temperature changes only.

To improve the accuracy of the temperature sensor measurement, each device is

individually factory-calibrated by ST. The temperature sensor factory calibration data are

stored by ST in the system memory area, accessible in read-only mode.

STM32G431C6 Datasheet(PDF) 29 Page - STMicroelectronics

STM32G431C6 Datasheet(HTML) 29 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL