 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
TUSB2E22 Datasheet(PDF) 9 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TUSB2E22 Datasheet(HTML) 9 Page - Texas Instruments |
|
|
9 / 30 page  6.5 Electrical Characteristics (continued) over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT VRX_CM Receive DC common mode range (low) eUSB2 Specification Section 7.1.2 (normative), low DC common mode RX must tolerate 120 mV VRX_CM Receive DC common mode range (high) eUSB2 Specification Section 7.1.2 (normative), high DC common mode RX must tolerate 280 mV VCM_RX_AC Receiver AC common mode (50MHz-480MHz) eUSB2 Specification Section 7.1.2 (informative), across the DC common mode range of 120 mV to 280 mV. (RX capability tested with intentional TX Rise/Fall Time mismatch and prop delay mismatch) –60 60 mV CRX_CM Receive center-tapped capacitance eUSB2 Specification Section 7.1.2 (informative) 15 50 pF VRX_DIF_SENS Receive differential sensitivity, RX should be able to receive less than this value. eUSB2 Specification Section 7.1.2, VCM = 120 mV to 450 mV 120 mVp-p eUSB0, eUSB1 HS OUTPUT LEVELS VETX_CM_AC Transmit CM AC (50MHz-480MHz) eUSB2 Specification Section 7.1.1, An ideal 80 Ω Rx differential termination and center tap cap of 15pF, with maximum DC common mode range –30 30 mV VEHSOD Transmit differential (terminated) Measured p2p, RL = 80 Ω, ideal 80 Ω Rx differential termination load 400 mV VE_TX_CM Transmit DC common mode eUSB2 Specification Section 7.1.1 170 230 mV 6.6 Switching Characteristics over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT DPA, DNA, DPB, DNB, FS Driver Switching Characteristics TFR Rise Time (10% - 90%) USB 2.0 Specification Figure 7-8; Figure 7-9 4 20 ns TFF Fall Time (10% - 90%) USB 2.0 Specification Figure 7-8; Figure 7-9 4 20 ns TFRFM (TFR/TFM) USB 2.0 Specification 7.1.2, Excluding the first transition from the Idle state 90 111.1 % DPA, DNA, DPB , DNB, LS Driver Switching Characteristics TLR Rise Time (10% - 90%) USB 2.0 Specification Figure 7-8 75 300 ns TLF Fall Time (10% - 90%) USB 2.0 Specification Figure 7-8 75 300 ns eDP0, eDN0, eDP1, eDN1, HS Driver Switching Characteristics TEHSRF_M M Transmit rise/fall mismatch eUSB2 Specification Section 7.2.1, Rise/fall mismatch = absolute delta of (rise – fall time) / (average of rise and fall time). 25 % eDP0, eDN0, eDP1, eDN1, LS/FS Driver Switching Characteristics TERF Rise/Fall Time (10% - 90%) eUSB2 Specification Section 7.2.1 2 6 ns TERF_MM Transmit rise/fall mismatch eUSB2 Specification Section 7.2.1 25 % www.ti.com TUSB2E22 SNLS648B – FEBRUARY 2019 – REVISED OCTOBER 2023 Copyright © 2023 Texas Instruments Incorporated Submit Document Feedback 9 Product Folder Links: TUSB2E22 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
