TLE4963-2M datasheet(43/91 Pages) INFINEON

43 / 91 page

Angle sensors

www.infineon.com/angle-sensors

Features

› Easy-to-use, plug-and-play sensors, pre-configured and pre-calibrated

› Offering high flexibility:

– Available as single and dual die products

– 12bit digital interface with protocol options PWM, SENT, SPC and SPI

– E2 PROM and look-up table for customer configuration and calibration

› High angle accuracy: max. 1.0° over temperature and lifetime

› High voltage capability up to 26 V

› Development fully compliant with ISO 26262

– Developed acc. ASIL D level

– Dual die sensors reaching ASIL D, single die sensors ASIL C metrics

› Safety manual and safety analysis summary report available on request

Applications

› Steering angle sensing (SAS)

› Motor commutation

› Rotor position measurement

› Pedal position

› Safety applications

› Any other kind of high-accuracy position measurement

TLE5014(D)

Digital iGMR2) sensor with an easy-to-use plug-and-play concept for highest functional safety applications

SPI

A/D

All XENSIV™ TLE5014 angle sensors are available as single and dual die products. The products come pre-configured and pre-cali-

brated as plug-and-play sensors and are easy to use. Customers can choose between the interfaces SENT, PWM, SPC, and SPI. On

top of those protocol options, the sensors can be adapted to any kind of application setup via their programmable E²PROM inter-

faces. TLE5014 magnetic angle sensors meet ISO 26262 ASIL C for the single die and ISO 26262 ASIL D for the dual die versions. All

products are ready for applications with the highest functional safety requirements. The sensors show an extremely small angle

error of less than 1° across the entire temperature profile and lifetime. This is particularly helpful in applications with the need for

very accurate position sensing such as steering angle sensing or motor commutation. Further application areas range from rotor

position measurement, electric power steering (EPS), pedal position to any other kind of position measurement.

1) More information on PRO-SIL™, see page 88

2) Giant Magneto Resistance

iGMR based angle sensors

TLE4963-2M Datasheet(PDF) 43 Page - Infineon Technologies AG