DIA1413/1414

Version 1.0, Sep 2024

www.dioo.com

© 2024 DIOO MICROCIRCUITS CO., LTD.

2

Table 2. Pin types

Pin Type

Description

Power

This pin is used to supply power or ground to the device.

AIO

Analog input/output. This pin is used as an I/O for analog signals.

DI

Digital input. This pin is used as a digital input. This pin is 5 V tolerant.

DIOD

Digital input/open-drain output. This pin is used as a digital I/O. When it is used as an output, it is open

drain and requires a pull-up resistor. This pin is 5 V tolerant.

OD

Open-drain digital output. This pin is used as a digital output. It is open-drain and requires a pull-up

resistor. This pin is 5 V tolerant.

2. Absolute Maximum Ratings

Exceeding the maximum ratings listed under Absolute Maximum Ratings when designing is likely to

damage the device permanently. Do not design to the maximum limits because long-time exposure to them

might impact the device’s reliability. The ratings are obtained over an operating free-air temperature range

unless otherwise specified.

Symbol

Parameter

Min.

Max.

Unit

VDD

Supply voltage

-0.3

4

V

V5VT_pin

Voltage on 5 V tolerant pins (SMCLK, SMDATA,

______

THERM/ADDR, and

______

ALERT )

-0.3

5.5

V

|V5VT_pin - VDD|

Voltage on 5 V tolerant pins (SMCLK, SMDATA,

______

THERM/ADDR, and

______

ALERT ) (Note)

0

3.6

V

Vpin

Voltage on any other pin to ground

-0.3

VDD + 0.3

V

TA

Operating temperature range

-40

125

°C

TSTG

Storage temperature range

-55

150

°C

TL

Lead temperature range

Refer to JEDEC spec. J-STD-020

Note: For the 5 V tolerant pins that have a pull-up resistor (SMCLK, SMDATA,

______

THERM/ADDR, and

______

ALERT ), the pull-up

voltage must not exceed 3.6 V when the device is unpowered.

3. Recommended Operating Condition

Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications.

The ratings are obtained over an operating free-air temperature range unless otherwise specified.

Symbol

Parameter

Min.

Max.

Unit

VDD

Supply voltage

3.0

3.6

V