GS-BT2416C2 datasheet(20/32 Pages) STMICROELECTRONICS

20 / 32 page

AT command

GS-BT2416C2.AT1

20/32

A.10

AT+BTSECMODE

Indicate if the module requests the authentication upon the setup of a Bluetooth SPP link.

An authentication request translates into a pairing request if two devices have never been

paired before.

Syntax: AT+BTSECMODE=<0,1>

Parameters:

0: The module does not request authentication

1: The module requests authentication

Return value: <OK, ERROR>

A.11

AT+BTENCMODE

Indicate if the module requests an encrypted link upon the setup of a Bluetooth SPP link.

Syntax: AT+BTENCMODE=<0,1>

Parameters:

0: The module does not request encryption

1: The module requests encryption

Return value: <OK, ERROR>

A.12

AT+BTPINCODE

Set the pin code of the local module. The module’s pin code is used during a pairing

procedure. In order to be successful, the module’s pin code and the connection pin code

specified during a connection set-up must be identical. See AT+BTCONNECT for more

information.

Syntax: AT+BTPINCODE=”Pincode”

Parameters:

Pincode: 4 to 16-byte string representing the module’s pin code

Return value: <OK, ERROR>

GS-BT2416C2 Datasheet(PDF) 20 Page - STMicroelectronics