| Electronic Components Datasheet Search |
|
ML22Q533 Datasheet(PDF) 133 Page - Rohm |
|
|
|||||||||||||||||||||||||||||
ML22Q533 Datasheet(HTML) 133 Page - Rohm |
|
133 / 178 page ![]() FEDL22Q53X-02 ML22Q53X PAN command ・ Command 1 1 1 1 0 0 C1 C0 1st byte R3 R2 R1 R0 L3 L2 L1 L0 2nd byte The PAN command sets the volume of the Lch/Rch during serial audio interface (SAI) operation. This command can be input regardless of the NCR signal status. Set the volume during playback or before starting playback. The initial value is 0dB for both channels. The Fade function can change the volume step by step. The channel settings are as follows: C1 C0 Description 0 0 Channel 0 0 1 Channel 1 1 0 Channel 2 1 1 Channel 3 The volume settings are as follows: R3/L3 R2/L2 R1/L1 R0/L0 Description 0 0 0 0 0 dB (initial value) 0 0 0 1 -0.58dB 0 0 1 0 -1.20dB 0 0 1 1 -1.87dB 0 1 0 0 -2.59dB 0 1 0 1 -3.38dB 0 1 1 0 -4.25dB 0 1 1 1 -5.22dB 1 0 0 0 -6.31dB 1 0 0 1 -7.55dB 1 0 1 0 -9.00dB 1 0 1 1 -10.74dB 1 1 0 0 -12.93dB 1 1 0 1 -15.85dB 1 1 1 0 -20.28dB 1 1 1 1 OFF For the fade function, refer to the "FADE command". For adjusting the Lch/Rch volume using FADE command, refer to the "Volume Settings" in the function description. For the PAN command input timing, refer to the "Change volume timing by PAN command" in the timing chart. 133/178 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |