HD6432351 datasheet(257/1025 Pages) RENESAS

257 / 1025 page

Section 7 DMA Controller (DMAC)

Rev. 3.00 Sep 15, 2006 page 223 of 988

REJ09B0330-0300

Bits 13 and 12—Reserved: Can be read or written to.

Bits 11 and 9—Data Transfer Acknowledge (DTA): These bits enable or disable clearing, when

DMA transfer is performed, of the internal interrupt source selected by the data transfer factor

setting.

When DTE = 1 and DTA = 1, the internal interrupt source selected by the data transfer factor

setting is cleared automatically by DMA transfer. When DTE = 1 and DTA = 1, the internal

interrupt source selected by the data transfer factor setting does not issue an interrupt request to the

CPU or DTC.

When the DTE = 1 and the DTA = 0, the internal interrupt source selected by the data transfer

factor setting is not cleared when a transfer is performed, and can issue an interrupt request to the

CPU or DTC in parallel. In this case, the interrupt source should be cleared by the CPU or DTC

transfer.

When the DTE = 0, the internal interrupt source selected by the data transfer factor setting issues

an interrupt request to the CPU or DTC regardless of the DTA bit setting.

The state of the DTME bit does not affect the above operations.

Bit 11—Data Transfer Acknowledge 1 (DTA1): Enables or disables clearing, when DMA

transfer is performed, of the internal interrupt source selected by the channel 1 data transfer factor

setting.

Bit 11

DTA1

Description

Clearing of selected internal interrupt source at time of DMA transfer is disabled

(Initial value)

Clearing of selected internal interrupt source at time of DMA transfer is enabled

Bit 9—Data Transfer Acknowledge 0 (DTA0): Enables or disables clearing, when DMA

transfer is performed, of the internal interrupt source selected by the channel 0 data transfer factor

setting.

Bit 9

DTA0

Description

Clearing of selected internal interrupt source at time of DMA transfer is disabled

(Initial value)

Clearing of selected internal interrupt source at time of DMA transfer is enabled

HD6432351 Datasheet(PDF) 257 Page - Renesas Technology Corp