HD6432142 datasheet(346/1177 Pages) RENESAS

346 / 1177 page

Section 10 14-Bit PWM Timer (PWMX)

Rev. 4.00 Sep 27, 2006 page 302 of 1130

REJ09B0327-0400

10.4

Operation

A PWM waveform like the one shown in figure 10.3 is output from the PWMX pin. When OS =

0, the value in DADR corresponds to the total width (T

L) of the low (0) pulses output in one

conversion cycle (256 pulses when CFS = 0, 64 pulses when CFS = 1). When OS = 1, the output

waveform is inverted and the DADR value corresponds to the total width (T

H) of the high (1)

output pulses. Figure 10.4 shows the types of waveform output available.

TL = ∑ tLn (when OS = 0)

n = 1

1 conversion cycle

× 214 (= 16384))

Basic cycle

× 64 or T × 256)

T: Resolution

Legend:

(When CFS = 0, m = 256; when CFS = 1, m = 64)

Figure 10.3 PWM D/A Operation

Table 10.4 summarizes the relationships of the CKS, CFS, and OS bit settings to the resolution,

base cycle, and conversion cycle. The PWM output remains flat unless DADR contains at least a

certain minimum value. Table 10.4 indicates the range of DADR settings that give an output

waveform like the one in figure 10.3, and lists the conversion cycle length when low-order DADR

bits are kept cleared to 0, reducing the conversion precision to 12 bits or 10 bits.

HD6432142 Datasheet(PDF) 346 Page - Renesas Technology Corp