www.ti.com

ADS1246EVM-PDK Kit Operation

Switch the BSL switch (SW4) on the MMB3 to the BSL position (to the left) as instructed, then press OK.

The plug-in downloads the firmware to the MMB3. This operation may take a couple of minutes, so the

progress is updated in the message at the top of the ADS1246 plug-in window (as Figure 13 shows). The

firmware is saved in flash memory on the MMB3, so this operation should only need to be performed

once.

Figure 13. Firmware Download Progress Indicator

When the firmware download completes, the message box shown in Figure 14 appears. Follow the

on-screen instructions and the plug-in should now connect to the EVM.

Figure 14. Firmware Download Complete Message Box

SBAU149A – June 2009 – Revised July 2009

ADS1146EVM, ADS1246EVM, ADS1146EVM-PDK, ADS1246EVM-PDK

15

Submit Documentation Feedback