CLVTH162240IDGGREP datasheet(3/10 Pages) TI1

3 / 10 page

SN74LVTH162240EP

3.3V ABT 16BIT BUFFER/DRIVER

WITH 3STATE OUTPUTS

SCBS780 − NOVEMBER 2003

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

logic diagram (positive logic)

1OE

1A1

1A2

1A3

1A4

1Y1

1Y2

1Y3

1Y4

2OE

2A1

2A2

2A3

2A4

2Y1

2Y2

2Y3

2Y4

3OE

3A1

3A2

3A3

3A4

3Y1

3Y2

3Y3

3Y4

4OE

4A1

4A2

4A3

4A4

4Y1

4Y2

4Y3

4Y4

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage range, VCC

−0.5 V to 4.6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (see Note 1)

−0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high-impedance

or power-off state, VO (see Note 1)

−0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high state, VO (see Note 1)

−0.5 V to VCC + 0.5 V

. . . . . . . . . . . . .

Current into any output in the low state, IO

30 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Current into any output in the high state, IO (see Note 2)

30 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0)

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0)

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Note 3)

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

2. This current flows only when the output is in the high state and VO > VCC.

3. The package thermal impedance is calculated in accordance with JESD 51.

CLVTH162240IDGGREP Datasheet(PDF) 3 Page - Texas Instruments

CLVTH162240IDGGREP Datasheet(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10

Datasheet Download

Link URL