4–1

4 Specifications

4.1

–0.3 V to 7 V

. . . . . . . . . . . . . . . . . . . . . .

Output voltage range, DOUT, FS, SCLK, FLAG0, FLAG1

. . . .

Output voltage range, OUTP, OUTM

. . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, DIN, PWRDWN, RESET, ALT DATA,

MCLK, FC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, INP, INM, AUXP, AUXM

. . . . . . . . . . . . . . . .

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . .

0

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

– 65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These

are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated

under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for

extended periods may affect device reliability.

NOTE 1: All voltage values are with respect to VSS.

4.2

Recommended Operating Conditions

MIN

NOM

MAX

UNIT

Supply voltage, AVDD

(see Note 2)

4.75

5.25

V

Analog signal input voltage,

VI(analog)

Differential, (INP – INM) peak,

for full scale operation

6

V

Resistance, IGAIN, R(IGAIN)

20

27

54

k

Ω

Load resistance, OUTP, OUTM, RL

5/27

 R(IGAIN)

k

Ω

ADC or DAC conversion rate

(sample rate)

8

22.05

kHz

Operating free-air temperature, TA

0

70

°C

4.2.1

MIN

NOM

MAX

UNIT

Supply voltage, DVDD (see Note 2)

4.5

5.5

V

High-level input voltage, VIH

2

V

Low-level input voltage, VIL

0.8

V

MCLK frequency (see Note 3)

4.096

11.29

MHz

4.2.2

MIN

NOM

MAX

UNIT

Supply voltage, DVDD (see Note 2)

2.7

3

3.3

V

High-level input voltage, VIH

1.8

V

Low-level input voltage, VIL

0.6

V

MCLK frequency (see Note 3)

4.096

11.29

MHz

NOTES:

2. Voltages at analog inputs and outputs and VDD are with respect to the VSS terminal.

3. The default state for an 8-kHz conversion rate requires a 4.096-MHz MCLK frequency.