STA333W datasheet(31/49 Pages) STMICROELECTRONICS

31 / 49 page

STA333W

Doc ID 13365 Rev 2

31/49

LRCK double trigger protection

Actively prevents double trigger of LRCLK.

Auto EAPD on clock loss

When active will issue a power device power-down signal (EAPD) on clock loss detection.

IC power down

The PWDN register is used to put the IC in a low-power state. When PWDN is 0, the output

begins a soft-mute. After the mute condition is reached, EAPD is asserted to power down

the power stage, then the master clock to all internal hardware except the I2C block is gated.

This puts the IC in a very low power consumption state.

External amplifier power down

The EAPD register directly disables/enables the internal power circuitry.

When EAPD = 0, the internal power section is placed in a low-power state (disabled).

Table 35.

LRCK double trigger protection

Bit

R/W

RST

Name

Description

R/W

LDTE

LRCLK double trigger protection enable

Table 36.

Auto EAPD on clock loss

Bit

R/W

RST

Name

Description

R/W

ECLE

Auto EAPD on clock loss

Table 37.

Power down

Bit

R/W

RST

Name

Description

6R/W

1PWDN

0: power down, low-power condition

1: normal operation

Table 38.

External amplifier power down

Bit

R/W

RST

Name

Description

R/W

EAPD

0: external power stage power down active

1: normal operation

STA333W Datasheet(PDF) 31 Page - STMicroelectronics

STA333W Datasheet(HTML) 31 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Datasheet Download

Link URL